Daze Blanc

How to set up your cocktail keg:

1. Please clean your Daze cocktail keg with warm water and mild soap before use.
2. Fill your Daze cocktail keg with your cocktail of choice. You can find recipes on our Instagram!
3. Attach the cocktail hose onto the barbed fitting of the spear base, ensure the hose can touch the base of the keg.
4. Screw the spear onto the cocktail keg.
5. Install the faucet into the spear body, making sure the fitting is tight.
6. Ensure the regulator knob is in the OFF position.
7. Screw in a new CO2 capsule turning clockwise firmly into the spear body.

How to adjust the tap:

1. Turn the regulator knob counterclockwise to 5-8 PSI. Place a glass underneath the faucet and pull forward until your cocktail flows out.
2. If no cocktail flows out, the CO2 capsule may need replacing.
3. Turn the regulator knob to the OFF position and install a new CO2 capsule as per the previous steps.
   
   

Troubleshooting:

Faucet Leakage: Remove the faucet and ensure the O-ring remains inside. Make sure the faucet & spear connection is tight and secure.

Leakage of CO2: Ensure the CO2 capsule is installed properly & tightly. Continue to tighten the capsule but never unscrew if gas remains. Release the pressure by pulling the CO2 ring before removal.